4-15
IM 04L51B01-41EN
Using the Maintenance Console
1
2
3
4
5
10
App
■ Setting the information
Set the following items. Click
Save to module
to apply the set information to the wireless
communication module.
Item
Description
Bit rate
Select 115200 bps.
Bit length
The bit length is fixed to 8 bit.
Stop bit
Select the stop bit (1 bit).
Parity
Select the parity (None).
■ Loading the current settings from the wireless communication module
Click
Load from module
to load the current settings from the wireless communication
module. You can change the interface information based on the loaded information.
Configuring the Interface (Protocol setup tab)
Set the interface information (protocol) used between the wireless communication module
and the connected device.
The following figure shows the window with the Detailed view check box selected. If you
remove the Detailed view check box, only the items with a check mark in the Simple view
column of the next table are displayed.
4.5 Configuring the Coordinator Module
