4-25
IM 04L51B01-41EN
Using the Maintenance Console
1
2
3
4
5
10
App
The following figure shows the window with the Detailed view check box selected.
If you remove the Detailed view check box, only the items with a check mark in the Simple
view column of the next table are displayed.
Item
Description
Simple
view
MAC address
The 64 bit MAC address is displayed.
ü
PAN ID (group number)
The PAN ID in use is displayed.
ü
Radio channel number
The channel number in use is displayed.
ü
Status
The current status is displayed.
• Normal (not connected to network)
• Normal (connected to network)
• Updating firmware
• Alarm issued
• Radio transmission time exceeded
ü
Network
The network status is displayed.
• No network connection
• Normal
• Authentication error
• Radio transmission stopped
• Sending serial data
ü
RSSI value
—
ü
IPv6 address
The IPv6 address assigned to the wireless module is
displayed.
DODAG ID
The DODAG ID in use is displayed.
Network name
The network name in use is displayed.
4.5.7
Setting the Network Scale (Network scale setup)
Optimize the control signal transmission frequency of the wireless communication module
according to the network scale.
How to open this window:
● In the main window, click
Coordinator configuration
. In the coordinator configuration
selection window, click
Network scale setup
on the
Tool
menu.
4.5 Configuring the Coordinator Module
