4-90
IM 04L51B01-41EN
2. Open the Communication test (Receiver) window.
With Communication test mode (Receiver) selected in the measurement tool selection
window (the window shown below), click
Launch tool
.
The following window appears.
3. Specify the COM port that the receiver wireless communication module is connected to.
Click the COM port drop-down list, select the COM port that the wireless communication
module is connected to, and then click
Open
.
4. Specify the channel for receiving radio signals.
Set the same channel number as that set on the first wireless communication module
(sender). Click the
Radio channel number
list, select the channel number, and then
click
Save to module
.
To check the channel number set in the wireless communication module, click
Load from
module
.
This completes the configuration of the second wireless communication module for
communication test (receiver). Start the communication test on the wireless communication
module configured to be the receiver.
4.10 Measurement Tool