IM 01C25R01-01E
1-1
1. INTRODUCTION
1.
INTRODUCTION
Thank you for purchasing the DPharp EJX multivariable
transmitter.
Your EJX multivariable Transmitter was precisely
calibrated at the factory before shipment. To ensure
both safety and efficiency, please read this manual
carefully before you operate the instrument.
NOTE
This manual mainly describes the hardware
configurations of EJX910 transmitter. For infor-
mation on the software configuration and opera-
tion, please refer to IM 01C25R02-01E for the
HART communication type and IM 01C 25R03-
01E for F
OUNDATION
Fieldbus
TM
protocol type.
To ensure correct use of this instrument, read
both the hardware and software manuals thor-
oughly before use.
Regarding This Manual
• This manual should be provided to the end user.
• The contents of this manual are subject to change
without prior notice.
• All rights reserved. No part of this manual may be
reproduced in any form without Yokogawa’s written
permission.
• Yokogawa makes no warranty of any kind with
regard to this manual, including, but not limited to,
implied warranty of merchantability and fitness for a
particular purpose.
• If any question arises or errors are found, or if any
information is missing from this manual, please
inform the nearest Yokogawa sales office.
• The specifications covered by this manual are
limited to those for the standard type under the
specified model number break-down and do not
cover custom-made instruments.
• Please note that changes in the specifications,
construction, or component parts of the instrument
may not immediately be reflected in this manual at
the time of change, provided that postponement of
revisions will not cause difficulty to the user from a
functional or performance standpoint.
• Yokogawa assumes no responsibilities for this
product except as stated in the warranty.
• If the customer or any third party is harmed by the
use of this product, Yokogawa assumes no responsi-
bility for any such harm owing to any defects in the
product which were not predictable, or for any
indirect damages.
• The following safety symbols are used in this
manual:
Instruction manuals for EJX910A and FSA210 are composed of the following three documents.
(For HART protocol type)
EJX910A Multivariable Transmitter
Instruction Manual
(IM01C25R01-01E)
This manual describes following
hardware configuration.
• Handling caution
• Installation
• Installing impulse piping
• Wiring
• Operation
• Maintenance
• General specifications
EJX910A Multivariable Transmitter
HART Communication Instruction Manual
(IM01C25R02-01E)
This manual describes HART parameter configuration.
FSA210 Mass Flow Configuration Software
Instruction Manual (IM01C25R50-01E)
This manual describes mass flow configuration
and HART parameter configuration.
This Instruction manual is in help menu of FSA210.
T0101.EPS
