manualshive.com logo in svg

YOKOGAWA Dpharp EJX910A, User Manual

Share
Download
YOKOGAWA Dpharp EJX910A User Manual Download Page 86

IM 01C25R03-01E

A-15

APPENDIX 2.  INTEGRATOR (IT) BLOCK

A2.5.2 Determining the Output Value

The value of OUT.Value is determined as follows:

 For counting up

    OUT = integration start value (0) + Total

 For counting down

    OUT = integration start value (TOTAL_SP) _ Total

Total: Total of integrated values. This value is retained even if INTEG_TYPE is changed during integration
 (in AUTO).

If OUT is rewritten in the MAN mode, integration starts with the value rewritten in MAN mode after the mode was
returned to AUTO.

The values in OUT_TRIP and OUT_PTRIP are determined according to the correlation between OUT and
TOTAL_SP/PRE_TRIP.

OUT_TRIP(#14):0

OUT_PTRIP(#15):0

OUT_TRIP(#14):1

OUT_PTRIP(#15):1

Counting up starting from 0

• For counting up

PRE_TRIP(#31)

OUT_TRIP(#14):0

OUT_PTRIP(#15):0

OUT_TRIP(#14):0

OUT_PTRIP(#15):1

OUT_TRIP(#14):1

OUT_PTRIP(#15):1

• For counting down

Counting down starting from TOTAL_SP

PRE_TRIP(#31)

0

0

TOTAL_SP(#7)

TOTAL_SP(#7)

FA0205.EPS

OUT_TRIP(#14):0

OUT_PTRIP(#15):1

Summary of Contents for Dpharp EJX910A












































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands