IM 01C25R03-01E
10-2
10. GENERAL SPECIFICATIONS
10.3 Optional specifications (For Explosion Protected type)
T1002.EPS
Code
Description
Item
Factory Mutual (FM)
CSA Explosionproof Approval
*1
Certificate: 1589701
[For CSA C22.2]
Applicable Standard: C22.2 No.0, C22.2 No.0.4, C22.2 No.0.5, C22.2 No.25, C22.2 No.30,
C22.2 No.94
Explosion-proof for Class I, Groups B, C and D.
Dustignition-proof for Class II/III, Groups E, F and G.
When installed in Division 2, “SEAL NOT REQUIRED” Enclosure: TYPE 4X, Temp. Code: T6...T4
[For CSA E60079]
Applicable Standard: CAN/CSA E60079-0, CAN/CSA E60079-1
Flameproof for Zone 1, Ex d IIC T6...T4 Enclosure: IP66 and IP67
Max.Process Temp.: T4; 120
!
C (248
!
F), T5; 100
!
C (212
!
F), T6; 85
!
C (185
!
F)
Amb.Temp.: –50 to 75
!
C (–58 to 167
!
F) for T4, –50 to 80
!
C (–58 to 176
!
F) for T5,
–50 to 70
!
C (–58 to 158
!
F) for T6
CENELEC ATEX (KEMA) Flameproof Approval
Applicable Standard: EN 50014, EN 50018, EN 50281-1-1
Certificate: KEMA 03ATEX2570
II 2G,1D EExd IIC T4, T5, T6
Amb. Temp. (Tamb) for gas-proof: T4; –50 to 75
°
C (–58 to 167
°
F),
T5; –50 to 80
!
C (–58 to 176
!
F), T6; –50 to 70
°
C (–58 to 158
°
F)
Max. process Temp.(Tp): T4; 120
!
C (248
!
F), T5; 100
!
C (212
!
F), T6; 85
!
C (185
!
F)
Max. surface Temp. for dust-proof: T80
°
C (Tamb: –40 to 40
!
C, Tp: 80
!
C),
T100
°
C (Tamb: –40 to 60
!
C, Tp: 100
!
C), T120
°
C (Tamb: –40 to 80
!
C, Tp: 120
!
C)
Type of protection: IP66 and IP67
CF1
FF1
FM Explosionproof Approval
Applicable Standard: FM3600, FM3615, FM3810, ANSI/NEMA 250
Explosionproof for Class I, Division 1, Groups B, C and D
Dust-ignitionproof for Class II/III, Division 1, Groups E, F and G
in Hazardous locations, indoors and outdoors (NEMA 4X)
Temperature class: T6, Amb. Temp.: –40 to 60
!
C (–40 to 140
!
F)
KF2
CENELEC ATEX
Canadian Standards
Association (CSA)
FM nonincendive Approval for FOUNDATION Fieldbus type
*1*3
Applicable Standard: FM3600, FM3611, FM3810, ANSI/NEMA 250
Nonincendive for Class I, Division 2, Groups A,B, C and D, Temp.Cl.T4; Class II, Division 2,
Groups F & G, Temp.Cl.T4; Class III, Division 1, Temp.Cl.T4; Class I, Zone 2, Group IIC,
Temp.Cl.T4
Amb. Temp.: –40 to 60
!
C (–40 to 140
!
F), Type 4X
Nonincendive Field Wiring and FNICO parameters
Supply circuit : Vmax=32 V, Ci=1.76 nF, Li=0
Sesor circuit : Vt=6 V, It=25 mA, Po=0.15 W, Ca=40
µ
F, La=40 mH
FN15
*1 Applicable for electrical connection code 2 and 7.
