YOKOGAWA Dpharp EJX910A, User Manual

Page: 57 / 139

IM 01C25R03-01E 9-5
9. PARAMETER LISTS
T0902-3.EPS
Write
Mode
Explanation
Factory
Default
Relative
Index
Parameter Name Index
2043 CAL_SP_
DEVIATION_LO O/S 0 43 Deviation value for zero adjustment of static pressure
2044 SP_VALUE_FTIME O/S 1 44 Damping time constant for static pressure
2045 ATM_PRESS O/S 101.325 45 Atmosphere pressure value used to obtain gauge pressure
value from absolute pressure.
2046 CURRENT_ATM_
PRESS_ENABLE O/S 0 46 Automatically sets the L-side static pressure value to the
atmospheric pressure value (ATM_PRESS).
2047 EXT_TEMP_VAL – 47 Indicates the external temperature value and status.
2048 EXT_TEMP_
RANGE – -200-
850
°
C
48 Indicates the external temperature sensor range, unit and
decimal point.
2049 CAL_EXT_TEMP_
POINT_HI O/S 100 49 This is High-side adjustment value. Adjust this value so that
the current external temperature becomes this setting value.
2050 CAL_EXT_TEMP_
POINT_LO O/S 0 50 This is Low-side adjustment value. Adjust this value so that
the current external temperature becomes this setting value.
2051 CAL_EXT_TEMP_
MIN_SPAN – 10.0 51 Indicates the minimum span of the external temperature.
2052 CAL_EXT_TEMP_
UNIT – 1001 52 Indicates the calibration unit of the external temperature
sensor.
2053 CAL_EXT_TEMP_
DEVIATION_HI O/S 0 53 This is the adjustment coefficient for performing span
adjustment of the external temperature.
2054 CAL_EXT_TEMP_
DEVIATION_LO O/S 0 54 This is the adjustment coefficient for performing zero
adjustment of the external temperature.
2055 EXT_TEMP_
VALUE_FTIME O/S 1.0 55 Sets the primary filter time constant (unit: seconds) of the
external temperature.
2057 FIXED_EXT_
TEMP_VALUE O/S 20.0 57 Sets the external temperature fixed value.
2058 SIMULATE_
MODE AUTO 0 58
This is the switch for enabling simulation.
0=Simulation OFF
1=Differential pressure signal simulation ON
2=Static pressure signal simulation ON
3=Differential pressure static pressure signal simulation ON
4=External temperature signal simulation ON
5=Differential pressure external temperature signal
simulation ON
6=Static pressure external temperature signal simulation
ON
7=Differential pressure static pressure external
temperature signal simulation ON
15=Differential pressure static pressure external
temperature signal (without damping processing) simulation ON
2056 EXT_TEMP_
OPTS O/S 0 56 Selects the external temperature selection operation.
0=No Selection OFF (output of external temperature)
1=Yes Selection ON (output of FIXED_EXT_TEMP_VALUE)
2=Fall Back Selection at broken wire (output of
FIXED_EXT_TEMP_VALUE at broken wire)
2037 SP_VALUE_
RANGE – Range of
capsule 37 High and low range limit values, engineering units, and
decimal point place for static pressure.
2038 CAL_SP_
POINT_HI O/S 25 38 The highest calibrated value for static pressure
2039 CAL_SP_
POINT_LO O/S 0 39 The Lowest calibrated value for static pressure
2040 CAL_SP_MIN_
SPAN – 1.0 40 The minimum calibration span allowed for static pressure
2041 CAL_SP_UNIT – 1545 (MPaa) 41 The calibrated engineering unit for static pressure. This unit is
linked to XD_SCALE.unit of AI blocks
2042 CAL_SP_
DEVIATION_HI O/S 0 42 Deviation value for span adjustment of static pressure