IM 701450-02E
10
Basic Key and Jog Shuttle Operation
Basic Key and Jog Shuttle Operation
Basic Key and Jog Shuttle Operation
Basic Key and Jog Shuttle Operation
This section explains the basics of using the keys and jog shuttle for entering settings on the DL7400.
Basic Key Operation
Working with the Setup Menu
ACQ menu
(the menu displayed by pressing the ACQ key)
Entering values by using the jog shuttle
(in menus with the , and icons)
Press the soft key to enable the jog shuttle ( :enabled, :disabled).
Turn the jog shuttle to select a value. Use the arrow key to change the
selected digit.
Selecting Items by using the jog shuttle
(in menus with the , and icons)
Press the soft key to enable the jog shuttle ( :enabled, :disabled).
Turn the jog shuttle to change the setting.
How to display the setup menu for the functions labeled in purple
Characters Press the SHIFT key (causing the SHIFT indicator above the key to illuminate),
then press a key labeled with purple characters to display the corresponding menu.
Note
Selecting an item among displayed selections
Each time you press the soft key, the selection item changes.
The selected item is highlighted.
Selecting Items by displaying a selection menu
Press a soft key to display the corresponding selection menu.
Press the soft key corresponding to the desired selection.
Setup menu
Soft keys
Working with Dialog Boxes
The delay setting dialog box
(Appears when pressing the MEASURE key, then turning the mode ON and pressing the Delay Setup soft key in the
setup menu that is displayed.)
Use the jog shuttle to select the desired setting.
Press the SELECT key to display the selection menu.
Turn the jog shuttle to move the cursor to the desired setting.
Press the SELECT key to enter the desired setting.
Each time you press the SELECT key, the selection item changes.
Press the SELECT key to display the numerical value input box.
Turn the jog shuttle to select a value.
Use the arrow key to change the selected digit.
When mode is selected
When edge count is selected
Numerical value
input box
Selection
menu
Setting dialog box
To close a setup menu or dialog box from the screen, press the ESC key.
Note
