5-45
IM CW500-01EN
Save
Press F2 (save) to show a confirmation message. Select Yes to save the
system settings to the SD memory card or internal memory.
Internal/SD card
Press F3 (internal memory/SD memory card) to change the save
destination. The current save destination is displayed with a mark in the
upper left of the screen.
Free size
Press F4 (free space) to display a pop-up screen showing the selected
medium information. Press ENTER (close) to return to the data transfer
screen.
For details, see “Space” on page 5-38.
Back
Press F1 (back) to return to the Saved data screen.
Settings That Are Saved
Basic Setup
Measurement Setup
Settings
Settings
Wiring
Demand
Measurement interval
Voltage range
Inspection cycle
VT ratio
Target value
Nominal voltage
Harmonics
THD (total harmonic distortion)
calculation method
Clamp/Current range
Allowable range
CT ratio
MAX hold
DC range
Power quality
Hysteresis threshold
Frequency
Transient threshold
Swell threshold
Other Setup
Dip threshold
Settings
Interruption threshold
Environment Date format
Inrush current threshold
System
settings
ID number
Flicker
Filter coefficient (ramp)
Buzzer
Phase advance
capacitor
Target power factor
5.6 Saved Data
