5-13
IM CW500-01EN
Measurement
Disable demand measurement or select the demand measurement cycle.
When demand measurement is started, the demand value is determined
every measurement interval and recorded. In demand measurement,
the recording interval can be set only to the times shown below. If the
interval is set to some other value and the measurement interval is set,
the interval is automatically set to the same value as the measurement
interval.
Selectable intervals: 1 s, 2 s, 5 s, 10 s, 15 s, 20 s, 30 s, 1 min, 2 min, 5
min, 10 min, 15 min,
*
30 min
*
* The interval cannot be set to a value longer than the measurement
interval.
Settings
Not be used, 10 min, 15 min, 30 min
*
* Default value
<Procedure>
Use the up and down arrow keys to move to Measurement.
→
Press
ENTER to show a pull-down menu.
→
Use the up and down arrow keys
to select the time.
→
Press ENTER to confirm or ESC to cancel.
Target
Set the demand measurement target value.
Settings
0.001mW~999.9TW(100.0kW
*
)
* Default value
<Procedure>
Use the arrow keys to move to Target.
→
Press ENTER to show a value
entry window.*
→
Use the arrow keys to enter the target value.
→
Press
ENTER to confirm or ESC to cancel.
* The input range is shown in a pop-up.
5.3 Measurement Setup
