5-1
IM CW500-01EN
5.1 Settings
Before starting measurement, you need to set measurement conditions
and data saving conditions.
To set these conditions, press SET UP to enter the SET UP mode.
The SET UP mode is divided into the following five categories. Use the
arrow keys to move between the categories.
The settings that you change take effect after you exit from the SET UP
mode and
appears in the upper left of the screen.
Note that even if you change the settings, if you turn off the power while
in SET UP mode, the settings will not take effect.
Basic
Set common measurement items.
Measurement
Set specific measurement items.
Recording
Set the saving method.
Saved Data
Edit recorded data or change the instrument settings.
Others
Configure environmental settings.
Settings
Measurement
(Demand)
(Harmonics)
(Power quality)
(Flicker)
(Phase advance
capacitor)
Recording
(REC item)
(Rec method)
(Manual/
Constant rec.
Time period rec.)
Basic
(Wiring)
(Voltage)
(Current)
(External
input DC)
(Frequency)
Saved Data
(Rec data)
(System settings)
Others
(Environment)
(System settings)
Chapter 5 Setup
