8-3
IIM CW500-01EN
<Procedure>
1
Open the connector cover.
2
While pressing the rectangular area above the appropriate terminal
with a flat-bladed screwdriver or the like, insert a signal wire.
3
Remove the screwdriver to fix the wire in place.
Signal wire
Flathead screwdriver or the like
Input Terminals
Input terminals are used to monitor voltage output signals from
temperature sensors or the like. They are useful when you need to
simultaneously measure a signal output from another device and the
anomalies that occur on that power supply.
Number of channels: 2
Input resistance: Approx. 225.6 kΩ
8.2 Signal Control with External Devices
