Ykk ap YES 45 FS, Installation Manual

Page: 15 / 36

Effective Date: May 29, 2018 | 02-4001-09
Page-11
YES 45 FS/FI Storefront System
“V”-groove
1”
1”
1”
1/4”
0.236” Dia.
0.236” Dia.
0.236” Dia.
YES 45 FI Head Shown
Others Similar
YES 45 FS
Horizontal/Sill
YES 45 FI
Horizontal/Sill
“V”-groove
STEP 3
FABRICATE HEAD, HORIZONTAL & SILL MEMBERS
-Cut head, sill and horizontal members to the daylight opening between verticals.
-Members that are to be attached to shear blocks require additional fabrication:
Head Members: Mark a hole location at each end, 1” from the ends
centered along the glazing pocket “V”-groove.
YES 45 FS horizontal and sill members:
Mark a hole location at each end, 1” from the ends
centered along the glazing pocket “V”-groove.
YES 45 FI horizontal and sill members:
Measure up 1/4” from the glazing pocket and
mark a hole location at each end, 1” from the ends.
-Drill a 0.236” diameter hole (# B drill bit) at each
location marked.
See Detail 6.
FRAME FABRICATION
Detail 6
STEP 4
FABRICATE GLASS STOPS & GLAZING ADAPTORS
-Cut glass stops to the same dimensions as their respective horizontals minus(–) 1/32”.
YES 45 FI only:
-Cut vertical glazing adaptors to the frame height.
-Cut horizontal glazing adaptors to the daylight opening minus(–) 1/32”.