YILMAZ PCC 6505, User Manual

Page: 145 / 204

10. MAINTENANCE INSTRUCTIONS 143

The spacing between the pinion gear and the toothed rack in the robot group should be checked.
Figure 6: Pinion and rack
ADJUST THE AIR PRESSURE

Pull up pressure adjustment valve. Set adjustment valve to
the desired value on manometer by turning it clockwise or
counter clockwise. Then lock the valve by pressing it down.

Set the air pressure between 6 and 8 BAR. If air pressure
drops below the stated values, accessories operating with
pneumatic power do not work.

Conditioner unit accumulates the water in the air in the
collection container so that it won’t damage pneumatic
components. At the end of the working day, empty the
accumulated water by opening water discharge valve under
the collection container.

In order to put oil to the oil tank, remove the reservoir by
turning. Oils recommended by the manufacturer are;
TELLUS C10 / BP ENERGOL HLP 10 / MOBIL DTE LIGHT /
PETROL OFİSİ SPINDURA 10.
Figure 7 : Conditioner unit