YILMAZ PCC 6505, User Manual

Page: 142 / 204

TYPE (
Column 27 ): It must be maximum 1 characters and in text format. (The type of profile placed should
be entered in this column. For example case, wing etc. The profile type should be in the following
format.)
A = Case
B = Wing
C = Wing with dripper
D = Outward Wing
E = Mullion profile
F = Sliding Case
G = Sliding Wing
H = Groined case
I = Dripspone case
For example, when introducing the profile, code A should be entered for case profile.
COLOR_CODE (
Column 28 ): It must be maximum 1 characters and in text format. (The color code of the
profile placed should be entered in this column. The color code of the profile types should be in the
following format.)
5 = White
6 = Colored
7 = Upper part colored lower part white
8 = Upper part white lower part colored
For example, when introducing the profile, code 1 should be entered for white profile.
STILL_LENGHT ( Column 29 ) : It must be maximum 8 characters and in text format. (In this area, the
support sheet size to be placed in the profile should be entered by multiplying by 10. For example, if
the length of the support sheet is 800 mm, it should be written as 8000.)
FRAME_NO ( Column 30 ): It must be maximum 4 characters and in text format. (The value written to this
field represents the frame number.)
REMAINING_LENGHT ( Column 31 ): It must be maximum 8 characters and in text format. (The remaining
part of the profile placed as 6000 mm should be written here by multiplying by 10. For example, if the
remaining part is 40 mm, 400 should be written in this field).
9. CUTTING LIST INFORMATION 140