YILMAZ PCC 6505, User Manual

Page: 127 / 204

7.11. Adjusting Robot Axis Speeds:

Press button from the list when on the cutting menu.

Enter the robot gripping speed X in field. This value is the speed at which the
robot scans the profile and then goes down the Z axis and goes to the axis X to hold the profile.

Enter the robot gripping speed Y in field. This value is the speed at which the
robot scans the profile and then goes down the Z axis and then goes to the point where it will hold
profile on axis Y.

Enter the robot Z gripping speed in field. This value is the movement speed
of the robot on axis Z after the robot makes scan and sees the profile.

While on the cutting menu;

The profile driving speed of the robot is entered in this
field.

The speed of the robot when looking for profile is
entered in this field.

The speed of the robot when come closer to the saw
while driving the profile is entered in this field.
7.12. Adjusting The Distance Between Robot Profile Holder And Clamps:

The distances between the robot jaw and the clamps located on the machine is adjusted from the
values written on the picture below.

In order to see the menu, press button from the list while on the cutting menu.

Press button and enter the required password (5678).
7. OPERATION 125