Yealink Yealink SIP-T46G Administrator'S Manual Download Page 37

Page: 37 / 625

Getting Started

The message “Welcome Initializing… please wait” appears on the LCD screen
when the IP phone starts up.

The main LCD screen displays the following:



Time and date



Soft key labels

Press the OK key to check the IP phone status, the LCD screen displays the valid IP
address, MAC address, firmware version, etc.

If the IP phone has successfully passed through these steps, it starts up properly and is
ready for use.

Icons associated with different features may appear on the LCD screen. The following
table provides a description for each icon on IP phones.

T48G

T46G

T42G/

T41P

T29G

T27P

T23P/T23G/T2

1(P) E2

Description

Network is
unavailable

Private line
registers
successfully

Registration
failed

(Flashing)

Registering

Hands-free
speakerphone
mode

Handset mode

Headset mode

Voice Mail

Text Message

Summary of Contents for Yealink SIP-T46G


















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Yealink SIP-T46G

Reviews:

Related manuals for Yealink SIP-T46G

Brands by name

Popular brands

Yealink Yealink SIP-T46G, Administrator'S Manual

Search results

Summary of Contents for Yealink SIP-T46G

Reviews:

Related manuals for Yealink SIP-T46G

Brands by name

Popular brands