Yealink Yealink SIP-T46G, Administrator'S Manual

Page: 398 / 625

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
384
features.action_uri_limit_ip
Local Web User Interface
Specify the trusted IP address(es)
for sending the action URI to the
IP phone.
Navigate to:
http://<phoneIPAddress>/servlet?
p=features-remotecontrl&q=load
Details of the Configuration Parameter:
Parameter Permitted Values Default
features.action_uri_limit_ip IP address or any Blank
Description:
Configures the address(es) from which Action URI will be accepted.
For discontinuous IP addresses, multiple IP addresses are separated by commas.
For continuous IP addresses, the format likes *.*.*.* and the “*” stands for the values
0~255.
For example: 10.10.*.* stands for the IP addresses that range from 10.10.0.0 to
10.10.255.255.
If left blank, the IP phone will reject any HTTP GET request.
If it is set to “any”, the IP phone will accept and handle HTTP GET requests from any
IP address.
Example:
features.action_uri_limit_ip = any
Web User Interface:
Features->Remote Control->Action URI allow IP List
Phone User Interface:
None
To configure the trusted IP address(es) for action URI via web user interface:
1. Click on Features->Remote Control.
2. Enter the IP address or any in the Action URI allow IP List field.