Yealink Telkom W52P, Configuration Manual

Page: 86 / 102

Yealink W52P IP DECT Phones Configuring Guide
74
You can create a conference with other two parties using the phone‟s local conference.
You can also create a conference between two calls by pressing the Conf. soft key.
You can use the handset to create a local conference with other parties. The handset
supports up to 3 parties (including yourself) in a conference call. You can create a
conference between an active call and a held call on the handset (on the same line or
different lines).
To set up a local conference call via the handset:
1. Place a call to the first party.
2. Press the Options soft key, and then select Conference.
3. Do one of the following:
- Enter the number of the second party or select the handset you want to add to
the conference.
Press , , or the Conf. soft key to dial out.
-
Press the Directory soft key, and then select the desired contact.
Press , , or the Call soft key.
If both the office number and the mobile number of the contact are stored,
select the desired number and press , , or the OK soft key to dial
out.
4. When the second party answers the call, you can consult with him or her before
adding the call to the conference.
5. Press the Conf. soft key again to join all parties in the conference.
To join two calls in a conference via the handset:
1. Place two calls on the handset.
2. Select the desired call and make sure the call is active.
3. Press the Options soft key, and then select Conference.
Two calls are joined in the conference.
To drop the conference call, press or the End soft key.