Yealink Telkom W52P, Configuration Manual

Page: 92 / 102

Yealink W52P IP DECT Phones Configuring Guide
80
The Europe area handset is compatible with CE standard base station.
To recognize the area of handset via the handset:
1. Press to enter the main menu.
2. Select ->Handset.
The LCD screen displays status information of handset status, you can press or
to scroll through to the Area field.
Why doesn‟t the power indicator on the base station light up?
Plug the supplied power adapter to W52P, if the power indicator doesn‟t light up, it
should be a hardware problem. Please contact your vendor or local distributor and
send the problem description for help. If you cannot get a support from them, please
send a mail which includes problem description, test result, your country and phone‟s
SN to Support@yealink.com .
Why doesn‟t the network indicator on the base station light up slowly flash?
It means that the W52P cannot get an IP address. Try connecting the W52P to another
switch port, if the network indicator still slowly flashes, please try a reset.
Why can I hear the verification tone from handset if the call is successfully handled by
the repeater?
To deactivate the verification tone on the repeater:
1. Switch off the repeater (disconnect the power adapter).
2. Switch it on for 1 to 5 seconds and switch it off again.
3. Switch it on again. The LED indicator on the repeater flashes slowly.
4. Switch it off again.
5. Switch it on again.
The verification tone is then deactivated. If you want to activate the verification tone,
repeat the above steps.
Why does paging fail?

Check the current mode of the base station. If the base station is not in the paging
mode, press the paging key on the base station to enter the paging mode.

Ensure that there is at least one handset registered to the base station.
Why can‟t I turn the handset on?
Ensure the batteries are inserted into the handset. If the batteries are already inserted
into the handset, place the handset in the charger cradle.