Yealink T48G, Administrator'S Manual

Page: 534 / 622

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
514
Identification Presentation on Yealink IP Phones .
Topic
CLIP and COLP Configuration
CLIP and COLP Configuration
The following table lists the parameters you can use to configure the CLIP and COLP.
Parameter account.X.cid_source
[1]
<MAC>.cfg
Description It configures the identity of the caller.
Permitted
Values
0-FROM
1-PAI
2-PAI-FROM
3-PRID-PAI-FROM
4-PAI-RPID-FROM
5-RPID-FROM
6-PREFERENCE, the IP phone uses the custom priority order for the sources of caller
identity (configured by the parameter “sip.cid_source.preference”).
Default 0
Web UI Account->Advanced->Caller ID Source
Parameter account.X.cid_source_privacy
[1]
<MAC>.cfg
Description
It enables or disables the IP phone to process Privacy header field in the SIP message.
Note: The priority order: PPI>Privacy>PRID/PAI/From
Permitted
Values
0-Disabled, the IP phone does not process Privacy header.
1-Enabled, the phone LCD screen presents anonymity instead if there is a Privacy: id in
the INVITE request.
Default 1
Parameter account.X.cid_source_ppi
[1]
<MAC>.cfg
Description
It enables or disables the IP phone to process the P-Preferred-Identity (PPI) header in
the request message for caller identity presentation.
Permitted
Values
0-Disabled, the IP phone does not process P-Preferred-Identity (PPI) header.
1-Enabled, the IP phone presents the caller identity from the P-Preferred-Identity (PPI)
header.
Default 0