Yealink T48G, Administrator'S Manual

Page: 367 / 622

Call Features
347
[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for
T41P/T41S/T27P/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2; for T19(P) E2, X=1.
Transfer Mode for Dsskey Configuration
You can configure the transfer mode for the IP phone when transferring the current call via a specified
DSS key. Yealink IP phones support three transfer modes: New Call, Blind Transfer and Attended Transfer.
The transfer mode is applicable to the following DSS keys:

Speed Dial key

Transfer key with an assigned value

BLF/BLF List key
It is not applicable to T19(P) E2 IP phones.
The following table lists the parameter you can use to configure transfer mode for Dsskey.
Parameter transfer.dsskey_deal_type <y0000000000xx>.cfg
Description
It configures the transfer mode for DSS key. When the user presses the DSS Key
during a call, the DSS Key behavior depends on the transfer mode.
Note: This feature is only applicable to the Speed Dial key, BLF/BLF List key or Transfer
key with an assigned value. It is not applicable to T19(P) E2 IP phones.
Permitted
Values
0-New Call
1-Attended Transfer
2-Blind Transfer
Default 2
Web UI Features->Transfer->Transfer Mode via Dsskey
Conference
The Yealink IP phones support three-way local conference and multi-way network conference.
Topics
Conference Type Configuration
Local Conference Configuration
Network Conference Configuration
Conference Type Configuration
You can specify which type of conference to establish.