Yealink T48G, Administrator'S Manual

Page: 311 / 622

Call Features
291
Permitted
Values
Single configuration (configure a specific value for the timer letter “T” for all strings
with “T” of the digit map)
Example:
account.1.dialplan.digitmap.interdigit_short_timer = 5
If “dialplan.digitmap.string” is set to <[2-9]x:86>3.T|0T, the IP phone will wait 5
seconds before matching the entered digits to this dial plan and placing the call.
Distribution configuration (configure a string of positive integers separated by “|”
for each string of the digit map in the corresponding position)
If there are more digit maps than timeout values, the last timeout is applied to the
extra digit map. If there are more timeout values than digit maps, the extra timeout
values are ignored.
Example:
account.1.dialplan.digitmap.interdigit_short_timer = 4|5|3|6|2|1
If “dialplan.digitmap.string” is set to <[2-9]x:86>3.T|2T|1xxT|0x.!|[2-9]11T, 4 is applied
to the “<[2-9]x:86>3.T” digit map, 5 is applied to “2T” digit map, 3 is applied to “1xxT”
digit map, 6 is applied to “0x.!” digit map, 2 is applied to the “[2-9]11T” digit map, the
last digit 1 is ignored.
Default 3
Parameter account.X.dialplan.digitmap.no_match_action
[1]
<MAC>.cfg
Description
It configures the behavior when an impossible digit map match occurs.
Note: It works only if “account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The
value configured by the parameter “account.X.dialplan.digitmap.no_match_action”
takes precedence over that configured by the parameter
“dialplan.digitmap.no_match_action”.
Permitted
Values
0-prevent users from entering a number and immediately dial out the entered
numbers
1-the dialing will fail and the LCD screen will prompt “Forbidden Number”
2-allow users to accumulate digits and dispatch call manually with the send key or
automatically dial out the entered number after a certain period of time configured by
the parameter “dialplan.digitmap.interdigit_long_timer”
Default Blank
Parameter account.X.dialplan.digitmap.active.on_hook_dialing
[1]
<MAC>.cfg
Description
It enables or disables the entered numbers to match the predefined string of the digit
map in real time on the pre-dialing screen.
To enter the pre-dialing screen, directly enter numbers when the phone is idle.
Note: It works only if “account.X.dialplan.digitmap.enable” is set to 1 (Enabled). The
value configured by the parameter
“account.X.dialplan.digitmap.active.on_hook_dialing” takes precedence over that