Yealink T48G Administrator'S Manual Download

Page: 418 / 622

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones

398

Topic

RTCP-XR Configuration

RTCP-XR Configuration

The following table lists the parameters you can use to configure the RTCP-XR.

Parameter voice.rtcp_xr.enable

[1]

<y0000000000xx>.cfg

Description It enables or disables the IP phone to send RTCP-XR packets.

Permitted

Values

0-Disabled

1-Enabled

Default 0

Web UI Settings->Voice Monitoring->Voice RTCP-XR Report

Parameter voice.rtcp.enable

[1]

<y0000000000xx>.cfg

Description It enables or disables the IP phone to send RTCP packets.

Permitted

Values

0-Disabled

1-Enabled

Default 1

Parameter voice.rtcp_cname

[1]

<y0000000000xx>.cfg

Description It configures the cname of the RTCP packets.

Permitted

Values

String

Default Blank

[1]

If you change this parameter, the IP phone will reboot to make the change take effect.

VQ-RTCPXR

The VQ-RTCPXR mechanism, compliant with

RFC 6035

, sends the service quality metric reports contained

in SIP PUBLISH messages to the central report collector.

A wide range of performance metrics are generated in the following three ways:



Based on current values, such as jitter, jitter buffer max and round trip delay.



Covers the time period from the beginning of the call until the report is sent, such as network
packet loss.



Computed using other metrics as input, such as listening Mean Opinion Score (MOS-LQ) and
conversational Mean Opinion Score (MOS-CQ).

Topics

Summary of Contents for T48G















































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for T48G

Reviews:

Related manuals for T48G

Brands by name

Popular brands

Yealink T48G, Administrator'S Manual

Search results

Summary of Contents for T48G

Reviews:

Related manuals for T48G

Brands by name

Popular brands