Yealink T48G, Administrator'S Manual

Page: 207 / 622

Phone Customization
187
Macro Action Description
“
edk.id_mode.enable
” to 1 (Enabled) and then long press
the Volume Up key when the phone is idle.
$P<label>&C<characters
number allowed>&N&M$
The user input prompt string. Enable to prompt the
pop-up box, specify the label for the input box, specify the
maximum input characters, specify the character type for
the input box, and specify whether to mask the input by
the “*”.
“label” means the specified label for pop-up box.
“characters number allowed” defines the maximum
number of input characters.
If &N is included, the character type is Number (default
input method: 123). If &N is not included, the character
type is Text (default input method: abc), you can manually
change input method.
If &M is included, the input are masked by the “*”.
Example: $PEnter name&C3&N&M means prompting an
Enter name pop-up box, the maximum number of input
characters is 3, the input type is Number, and the input is
masked by the “*”.
$P<EDK prompt
X>N<characters number
allowed>$
This is a macro substitution string.
“EDK prompt X” means which EDK prompt is invoked. It
indicates the X defined by
“edk.edkprompt.X.enable
”.
“
characters number allowed
” defines the maximum
number of input characters. You need to press the Enter
soft key to complete data entry.
Example: $P2N5$ means invoking the EDK prompt 2 and
inputting 5 characters at most.
Note: For more information on EDK prompt, refer to
EDK
Prompt Configuration .
$L<label>$
This is the label for the entire operation. The value can be
any string including the null string (in this case, no label
displays).
This label is used if no label is configured for a custom key
DSS key or soft key, otherwise this one is ignored. Make
this the first entry in the action string.
Example: $LEDK2$1234$Tinvite$ defines calling out the
number 1234 and using the label “EDK2” for a Custom Key
DSS key or soft key.