Yealink T48G, Administrator'S Manual

Page: 336 / 622

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series IP Phones
316
The IP phone will send the code to deactivate anonymous call rejection feature on
server-side when you deactivate it on the IP phone.
Example:
account.1.anonymous_reject_offcode = *75
Permitted
Values
String within 32 characters
Default Blank
Web UI None ( “account.X.anonymous_call.server_base_only” cannot be left blank)
Phone UI None ( “account.X.anonymous_call.server_base_only” cannot be left blank)
[1]
X is the account ID. For T54S/T48S/T48G/T46S/T46G/T29G, X=1-16; for T52S/T42G/T42S, X=1-12; for
T41P/T41S/T27P/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21(P) E2, X=1-2; for T19(P) E2, X=1.
Call Waiting
Call waiting enables you to receive another call when there is already an active call on your phone. If it is
disabled, the new incoming call will be rejected automatically.
You can enable call waiting feature and set the phone to play a warning tone to avoid missing important
calls during a call.
Yealink IP phones also support call waiting on code and off code to activate and deactivate server-side
call waiting feature. They may vary on different servers.
Topic
Call Waiting Configuration
Call Waiting Configuration
The following table lists the parameters you can use to configure call waiting.
Parameter call_waiting.enable <y0000000000xx>.cfg
Description It enables or disables the call waiting feature.
Permitted
Values
0-Disabled, a new incoming call is automatically rejected by the IP phone with a busy
message during a call.
1-Enabled, the LCD screen will present a new incoming call during a call.
Default 1
Web UI Features->General Information->Call Waiting
Phone UI Menu->Features->Call Waiting->Call Waiting
Parameter call_waiting.tone <y0000000000xx>.cfg