Basic Call Features
83
on page
on page
for more
information).
3.
Press or to dial out.
4.
Press or the Tran soft key to complete the transfer when receiving ringback.
To perform an attended transfer:
1.
Press or the Tran soft key during a call.
2.
Do one of the following:
-
Enter the number you want to transfer the call to.
-
Press the Dir soft key, and then select Local Directory. Select the desired group
and search for the contact (Directory should be configured in advance. Refer to
on page
-
Press the Dir soft key, and then select History. Select the desired list and then
press or to select the entry (Directory should be configured in
advance. Refer to
on page
-
Press the Dir soft key, and then select Remote Phone Book. Select the desired
group and search for the contact (Directory should be configured in advance.
Refer to
on page
on page
for more
information).
3.
Press or to dial out.
4.
After the party answers the call, press or the Tran soft key to complete the
transfer.
If you are using a handset, the transfer can be completed by hanging up the handset.
You can cancel the transfer before the call is connected by pressing the Cancel soft key.
You can enable or disable call waiting on the phone. If call waiting is enabled, you can
receive another call while there is already an active call on the phone. Otherwise,
another incoming call is automatically rejected by the phone with a busy message
when there is an active call on the phone. You can also enable or disable the phone to
play a warning tone when receiving another call.
Summary of Contents for SIP-T19 E2 T4 Series
