User Guide for the SIP-T19(P) E2 IP Phone
14
After your phone is powered on, the system boots up and performs the following steps:
Automatic Phone Initialization
The phone finishes the initialization by loading the saved configuration. The LCD screen
displays ―Welcome Initializing…please wait‖ during this process.
DHCP (Dynamic Host Configuration Protocol)
The phone attempts to contact a DHCP server in your network to obtain valid IPv4
network settings (e.g., IP address, subnet mask, default gateway address and DNS
address) by default.
Note
You can view phone status via phone user interface or web user interface.
Available information of phone status includes:
Network status (e.g., IPv4 status, IP mode and MAC address).
Phone status (e.g., product name, hardware version, firmware version, product ID,
MAC address and device certificate status).
Account status (e.g., register status of SIP accounts).
Note
To view the phone status via phone user interface:
1.
Press , or press Menu->Status.
2.
Press or to scroll through the list and view the specific information.
To view the phone status via web user interface:
1.
Open a web browser of your computer.
2.
Enter the IP address in the browser’s address bar, and then press the Enter key.
If your network does not use DHCP, proceed to
on page
You can view device certificate status via phone user interface only.
Summary of Contents for SIP-T19 E2 T4 Series
