background image

 

Copyright ©  2016 YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD 
Copyright ©  2016 Yealink(Xiamen) Network Technology CO., LTD. All rights reserved. No parts of 
this publication may be reproduced or transmitted in any form or by any means, electronic or 
mechanical, photocopying, recording, or otherwise, for any purpose, without the express written 
permission of Yealink(Xiamen) Network Technology CO., LTD. Under the law, reproducing 
includes translating into another language or format. 

When this publication is made available on media, Yealink(Xiamen) Network Technology CO., 
LTD. gives its consent to downloading and printing copies of the content provided in this file only 
for private use but not for redistribution. No parts of this publication may be subject to alteration, 
modification or commercial use. Yealink(Xiamen) Network Technology CO., LTD. will not be 
liable for any damages arising from use of an illegally modified or altered publication. 

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS GUIDE ARE 
SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND 
RECOMMENDATIONS IN THIS GUIDE ARE BELIEVED TO BE ACCURATE AND PRESENTED 
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL 
RESPONSIBILITY FOR THEIR APPLICATION OF PRODUCTS. 

YEALINK(XIAMEN) NETWORK TECHNOLOGY CO., LTD. MAKES NO WARRANTY OF ANY KIND 
WITH REGARD TO THIS GUIDE, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Yealink(Xiamen) Network 
Technology CO., LTD. shall not be liable for errors contained herein nor for incidental or 
consequential damages in connection with the furnishing, performance, or use of this guide. 

   

Hereby, Yealink(Xiamen) Network Technology CO

.,

 LTD. declares that this phone is in 

conformity with the essential requirements and other relevant provisions of the CE, FCC. 

You can find the CE and FCC information from the label on the back of the IP phone. 

Statements of compliance can be obtained by contacting [email protected].

This device is marked with the CE mark in compliance with EC Directives 2014/35/EU and 2014/30/EU.

 

Any Changes or modifications not expressly approved by the party responsible for compliance could void 

the user's authority to operate the equipment. 

Summary of Contents for SIP-T19 E2 T4 Series

























































































































































Reviews: