Call Features
337
tom outbound identity configured by “dialplan.emergency.custom_asserted_id” will be used if the
phone fails to get the LLDP-MED ELIN value.
CUSTOM-The custom outbound identity configured by “dialplan.emergency.custom_asserted_id” will
be used; if “dialplan.emergency.custom_asserted_id” is left blank, the LLDP-MED ELIN value will be
used.
HELD-The phone will use the HELD protocol to retrieve location information from the Location Inform-
ation Server.
GENBAND-Ribbon E911 feature is enabled, the location ID will be added to the INVITE and
REGISTER SIP messages.
Default
ELIN
Parameter dialplan.emergency.asserted_id.sip_account
<y0000000000xx>.cfg
Description It configures the account to be used to retrieve E911 location information.
Permitted
Values
T58A/VP59: Integer from 1 to 16;
CP960: 1.
Default
1
Parameter dialplan.emergency.custom_asserted_id
<y0000000000xx>.cfg
Description
It configures the custom outbound identity when placing an emergency call.
Note: It works only if “dialplan.emergency.enable” is set to 1 (Enabled) and “dial-
plan.emergency.asserted_id_source” is not set to HELD.
Permitted
Values
A number with 10 to 25 digits - for example, 1234567890. The SIP URI constructed from the number
and SIP server (for example, abc.com) is included in the P-Asserted-Identity (PAI) header (for
example, <sip:[email protected] > ).
SIP URI - for example, sip:[email protected]. The full URI is included in the P-Asserted-Iden-
tity (PAI) header and the address will be replaced by the emergency server (for example,
<sip:[email protected] > ).
TEL URI - for example, tel:+16045558000. The full URI is included in the P-Asserted-Identity (PAI)
header (for example, <tel:+16045558000 > ).
Default
Blank
Parameter dialplan.emergency.server.X.address
[1]
<y0000000000xx>.cfg
Description
It configures the IP address or domain name of the emergency server X to be used for routing calls.
Note: If the account information has been configured (no matter whether the account registration suc-
ceeds or fails), the emergency calls will be dialed using the following priority: SIP server > emergency
server; if not, the emergency server will be used. It works only if “dialplan.emergency.enable” is set to
1 (Enabled) and “dialplan.emergency.asserted_id_source” is not set to HELD.
Permitted
Values
IP address or domain name
Default
Blank
Parameter dialplan.emergency.server.X.port
[1]
<y0000000000xx>.cfg
Description
It configures the port of emergency server X to be used for routing calls.
Note: It works only if “dialplan.emergency.enable” is set to 1 (Enabled) and “dial-
plan.emergency.asserted_id_source” is not set to HELD.
Permitted
Values
Integer from 0 to 65535
Summary of Contents for One Talk CP960
Page 1: ......
