Administrator’s Guide for VP59/SIP-T58A/CP960 IP Phones
146
Permitted
Values
Integer from -50 to 50
Default
0
Supported
Devices
All phones except CP960
Parameter voice.handset.tia4965.enable
<y0000000000xx>.cfg
Description
It enables or disables the handset's volume level to be reset to level 11 after the call if the volume
level for the current call exceeds the standards.
Note: The value configured by the parameter “voice.handset.autoreset_spk_vol” takes precedence
over that configured by this parameter.
Permitted
Values
0-Disabled
1-Enabled, if the handset's volume level for the current call is adjusted to level 12/13/14/15, the
volume level automatically resets to 11 after the call. That is, the initial volume level is 11 for the next
call.
Default
1
Supported
Devices
T58A
Parameter voice.headset.tia4965.enable
<y0000000000xx>.cfg
Description
It enables or disables the headset's volume level to be reset to level 11 after the call if the volume
level for the current call exceeds the standards.
Note: The value configured by the parameter “voice.headset.autoreset_spk_vol” takes precedence
over that configured by this parameter.
Permitted
Values
0-Disabled
1-Enabled, if the headset's volume level for the current call is adjusted to level 12/13/14/15, the
volume level automatically resets to 11 after the call. That is, the initial volume level is 11 for the next
call.
Default
1
Supported
Devices
T58A
[1]
If you change this parameter, the phone will reboot to make the change take effect.
Tones
When receiving a message, the phone will play a warning tone. You can customize tones or select specialized tone
sets (vary from country to country) to indicate different conditions of the IP phone.
Topics
Supported Tones
Tones Configuration
Supported Tones
The default tones used on the phones are the US tone sets. Available tone sets for phones:
l
Australia
l
Austria
l
Brazil
l
Belgium
Summary of Contents for One Talk CP960
Page 1: ......