Yealink One Talk CP960, Administrator'S Manual

Page: 87 / 533

Administrator’s Guide for VP59/SIP-T58A/CP960 IP Phones
84
Permitted
Values
Integer from 1 to 2147483646
Default 8
Parameter static.zero_touch.network_fail_delay_times <y0000000000xx>.cfg
Description
It configures the duration time (in milliseconds) of every reconnection when zero touch module fails to
obtain network parameters.
Permitted
Values
Integer from 1000 to 2147483646
Default 1000
Parameter static.features.hide_zero_touch_url.enable <y0000000000xx>.cfg
Description It enables or disables the phone to hide the provisioning URL item on the Zero Touch screen.
Permitted
Values
0-Disabled
1-Enabled
Default 0
PnP Provision Configuration
The following table lists the parameter you can use to configure PnP provision.
Parameter static.auto_provision.pnp_enable <y0000000000xx>.cfg
Description It triggers the Plug and Play (PnP) feature to on or off.
Permitted
Values
0-Off
1-On, the phone broadcasts SIP SUBSCRIBE messages to obtain a provisioning server URL where
the phone can request the configuration from during startup.
Default 1
Web UI Settings > Auto Provision > PNP Active
Parameter static.auto_provision.pnp_check_url.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to match the received provisioning URL with the last one from where
the phone successfully requests the configuration via a PnP provision.
Permitted
Values
0-Disabled
1-Enabled, the phone performs a PnP provision again only when the provisioning URLs are matched.
Default
0
Supported
Devices
All phones except VP59
DHCP Provision Configuration
You can select to use IPv4 or IPv6 custom DHCP option according to your network environment. The IPv4 or IPv6
custom DHCP option must be in accordance with the one defined in the DHCP server.
The following table lists the parameters you can use to configure the DHCP provision.
Parameter static.auto_provision.dhcp_option.enable <y0000000000xx>.cfg
Description It triggers the DHCP Active feature to on or off.
Permitted
0-Off