![background image](http://html1.mh-extra.com/html/yealink/one-talk-cp960/one-talk-cp960_administrators-manual_908553244.webp)
Phone Customization
241
Macro Action
Description
s.enable” and “edk.id_mode.enable” to 1 (Enabled) and then long press the
Volume Up key when the phone is idle.
$K<key name>$
The functionality of performing this action is the same as that of pressing the
desired hard key.
Supported key names include:
l
LineKeyX (for VP59/T58A, X=1-27).
l
SoftKeyX (X ranges from 1 to 4)
l
VolDown
l
VolUp
l
DialPadX (X ranges from 0 to 9)
l
DialPadPound
l
DialPadStar
l
Headset
l
Mute
l
Message
l
Hold
l
Redial
l
Transfer
l
Speaker
l
ExtX@Y (X stands for the serial number of expansion module key, Y stands
for the serial number of expansion module; For T58A: X ranges from 1 to
60, Y ranges from 1 to 3; @Y can be omitted if there is only one expansion
module connected to the phone.)
l
Menu (You can enter the menu by executing this command at any interface
except the non-executable situations. For example, entering menu is
blocked during an active call.)
l
Home (You can return to the Home screen by executing this command on
any screen)
Example: $KDialPadPound$ means pressing the pound key.
Note: If a key (for example, Redial key) is not found but the function is avail-
able, the phone will perform the corresponding action. If a key is not found
and the function is unavailable, the execution of the action string will be
ignored.
$I<menu item ID>$
The action is to position and enter the desired menu item.
Each menu item has a unique identifier on the IP phone, and you can con-
figure this parameter according to the system-defined menu item ID. If the
menu item ID is not defined on the phone or there is no matched menu item
on the current screen, the execution of the action string will be ignored. The
menu item ID is case-insensitive.
Example: $Istatus_list& means entering the Status menu.
Note: To view the menu item ID, you can set “edk.id_mode.enable” to 1
(Enabled) and then long press the Volume Up key when the phone is idle.
$P<label>&T<title>&C<characters
number allowed>&N&M$
The string of the user input promt.
“label” means the specified label for the user input prompt.
"title" means the specified title for the user input prompt.
“characters number allowed” defines the maximum number of input char-
Summary of Contents for One Talk CP960
Page 1: ......