Network Configurations
52
Supported Transmission Methods
Three optional methods of transmission configuration for the IP phone Internet port and PC port (the CP960 phones
have Internet port only):
l
Auto-negotiate
l
Half-duplex (transmit in 10Mbps or 100Mbps)
l
Full-duplex (transmit in 10Mbps, 100Mbps or 1000Mbps)
Auto-negotiate is configured for both Internet and PC ports on the IP phone by default.
Internet Port and PC Port Configuration
The following table lists the parameters you can use to configure the Internet port and PC port.
Parameter static.network.pc_port.enable
[1]
<y0000000000xx>.cfg
Description It enables or disables the PC port.
Permitted
Values
0-Disabled
1-Auto Negotiation
Default
1
Supported
Devices
All phones except CP960
Web UI
Network > PC Port > PC Port Active
Parameter static.network.internet_port.speed_duplex
[1]
<y0000000000xx>.cfg
Description
It configures the network speed over Ethernet of the Internet port.
Note: For VP59/T58A phones, you can set the transmission speed to 1000Mbps/Auto Negotiation to
transmit in 1000Mbps if the phone is connected to the switch supports Gigabit Ethernet. We recom-
mend that you do not change this parameter.
Permitted
Values
0-Auto Negotiation
1-Full Duplex 10Mbps
2-Full Duplex 100Mbps
3-Half Duplex 10Mbps
4-Half Duplex 100Mbps
5-Full Duplex 1000Mbps (only applicable to VP59/T58A phones)
Default
0
Web UI
Network > Advanced > Port Link > WAN Port Link
Parameter static.network.pc_port.speed_duplex
[1]
<y0000000000xx>.cfg
Description
It configures the network speed over Ethernet of the PC port.
Note: It works only if “static.network.pc_port.enable” is set to 1 (Auto Negotiation). For VP59/T58A
phones, you can set the transmission speed to 1000Mbps/ Auto Negotiation to transmit in 1000Mbps
if the phone is connected to the switch supports Gigabit Ethernet. We recommend that you do not
change this parameter.
Permitted
Values
0-Auto Negotiation
1-Full Duplex 10Mbps
2-Full Duplex 100Mbps
Summary of Contents for One Talk CP960
Page 1: ......
