Audio Features
143
6 or Ring6.wav
7 or Ring7.wav
8 or Ring8.wav
9 or Silent.wav
10 or Splash.wav
l
Custom ring tone name (for example, Customring.wav)
Default
1
Web UI
Settings > Ring > Internal Ringer X
[2]
> File
[1]
X is the account ID. For VP59/T58A, X=1-16; for CP960, X=1.
[2]
X is the ring tone ID. X=1-10.
Ringer Device
You can use either or both the speaker and the headset as the ringer devices. You can configure which ringer
device to be used when receiving an incoming call. For example, if the ringer device is set to Headset, ring tone will
be played through your headset.
If the ringer device is set to Headset or Headset&Speaker, the headset (either a wired headset, Bluetooth headset
or USB headset) should be connected to the IP phone and the headset mode also should be activated in advance.
You can press the HEADSET key to activate the headset mode.
You can press the HEADSET key to activate the headset mode. For more information, refer to the
.
It is not applicable to CP960 phones.
Topic
Ringer Device Configuration
The following table lists the parameters you can use to configure the ringer device.
Parameter features.ringer_device.is_use_headset
<y0000000000xx>.cfg
Description It configures the ringer device for the phone.
Permitted
Values
0-Use Speaker
1-Use Headset
2-Use Headset & Speaker
Default
0
Supported
Devices
All phones except CP960
Web UI
Features > Audio > Ringer Device for Headset
Audio Volume
You can configure the sending volume and ringer volume for the phone.
Topics
Summary of Contents for One Talk CP960
Page 1: ......