YealinkCP860 Phones Configuring Guide
18
2.
Select
IPv4
or
IPv4&IPv6
from the pull-down list
of
Internet Port Mode(IPv4/IPv6)
.
3.
Mark the
Enabled
radio box in the
Static DNS
field when
DHCP
is selected from the
pull-down list of
Internet Port Type for IPV4
.
4.
Enter the valid value in the
Primary DNS
and
Secondary DNS
field respectively.
5.
Click the
Save soft
key to accept the change.
6.
Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to
You can also configure a static IPv6 DNS for the IP DECT phone. Before configuring it, make sure
that the IP mode is configured as
IPv6
or
IPv4&IPv6
.
To configure Static IPv6
DNS manually via CommPortal phone configurator:
1.
Click on
Network >IP Setting.
2.
Select
IPv6
or
IPv4&IPv6
from the pull-down list
of
Internet Port Mode(IPv4/IPv6)
.
3.
Mark the
Enabled
radio box in the
Static DNS
field when
DHCP
is selected from the the
pull-down list
of
Internet Port Type for IPV6
.
Summary of Contents for CP860 SERIES
Page 1: ......
Page 6: ...YealinkCP860 Phones Configuring Guide vi...
Page 18: ...YealinkCP860 Phones Configuring Guide 10...
