Yealink CP860 SERIES, Configuring Manual

Page: 54 / 77

YealinkCP860 Phones Configuring Guide
46
or to select the entry (Directory should be configured in advance. Refer to
Directory on page 25 for more information).
- Press the
Directory
soft key, and then select
Remote Phone Book
. Select the desired
group and search for the contact (Directory and Remote Phone Book should be
configured in advance. Refer to
Directory on page 25 and Remote Phone Book on
page 26 for more information).
3.
Press , or to dial out.
4.
After the party answers the call, press the
Tran
soft key to complete the transfer.
You can cancel the transfer before the call is connected by pressing the
Cancel
soft key.
Conference Call
You can create a conference with other four parties using the phone’s local conference. You can
view and manage each participant in the conference call.
The CP860 IP conference phone supports up to five parties (including yourself) in a conference
call.
To set up a three-way local conference call:
1.
Place a call to the first party.
2.
When the first party answers the call, press the
Conf
soft key to place a new call.
The active call is placed on hold.
3.
Enter the number of the second party and press , , or the
Send
soft key.
4.
When the second party answers the call, press the
Conf
soft key again to join all parties in
the conference.
You can create a conference between an active call and a call on hold by pressing the the
Conf
soft key.
To set up a conference call with an active call and a call on hold:
1.
Establish two calls on the phone.
2.
Press or to select an active call.
3.
Press the
Conf
soft key to join the two calls in the conference.
To join more parties in an established conference call:
1.
Press the
Manage
soft key after the conference call is established.
2.
Press the
NewCall
soft key to place a new call.
3.
Enter the number of the new party and press , , or the
Send
soft key.