YATO YT-82961, Manual, Page: 8 / 36

8
GB
O R I G I N A L I N S T R U C T I O N S
MAINTENANCE AND OVERHAUL
CAUTION! Remove the battery from the device’s socket before performing adjustment, technical service or maintenance activ-
ities. Having fi nished working, check the device for damage by visually inspecting the exterior and the body and the handle, the
functioning of the electric switch, the vents for clogging, the motor brushes for sparking, the noise level of the bearings and the
drive transmission, and how the device starts and runs. During the warranty period, the user is not allowed to disassemble the
device or replace any components or parts, as this will void the warranty rights. Any irregularities found during overhaul or the
operation signal the need for repair at a service centre. For this purpose, contact the manufacturer. Having fi nished your work,
clean the housing, the vents, all switches, all handles and guards with compressed air (at 0.3 MPa maximum), a brush or a dry
cloth. Do not use any chemicals or cleaners. Do not use sharp tools for cleaning. Remove the circular saw and clean the inside of
the guards, the fi xing of the circular saw, as well as the saw itself from dust and other impurities generated during operation. Clean
handles, knobs and other adjusting parts with a dry, clean cloth.
TECHNICAL DATA
Parameter Unit Value
Catalogue No. YT-82961
Supply voltage [V DC] 18
Luminous fl ux [lm] 1600
Colour rendering index CRI Ra ≥ 80
Colour temperature [K] 6500
Protection rating IP20
Insulation class III
Weight [kg] 1,31
Battery type Li-Ion
Maximum illumination time (3 Ah battery) 50% / 100% [h] 10/5