www.dadehpardazan.ir 88594014-15
2 Installation
2.2.4 SGLC Linear Servomotors (Cylinder Type)
2-24
4.
After mounting the movable table provided by the customer on the linear
guide, transfer the movable table onto the moving coil and secure them
with bolts.
• Carefully lay wiring so that no cables are caught, and fix them to the movable
table.
• For the recommended tightening torque of the bolts for fixing the moving coil,
refer to
Table 2.2 Moving Coil and Recommended Tightening Torque
.
Note: Use hexagon socket head cap screws made of austenite stainless steel
(equivalent to the strength class A2-70.)
5.
Remove the part made of resin between the moving coil and the
magnetic way. Be careful not to get your fingers or other objects caught
between the moving coil and the magnetic way because a strong
magnetic attraction is generated between them.
6.
Perform several full strokes with the movable table, and make sure that
the table may not come into contact with the magnetic way. (The size of
the gaps is not specified.)
Table 2.2 Moving Coil and Recommended Tightening Torque
Moving Coil
Model
SGLCW-
Nominal Diameter
of Bolts
Tightening torque
(N
cm)
D16
M3
100
D20
M4
220
D25
M5
450
D32
M6
760
