www.dadehpardazan.ir 88594014-15
5.6 JOG Operation
5-27
5
T
rial Operation (Checking Linear Servomotor Operation)
5.6.1
JOG Operation Using a Panel Operator
This section describes the procedure for executing a JOG operation using a panel
operator.
The panel operator is located under the front cover of the SERVOPACK (analog
pulse models only).
Step
Display after operation
Keys
Operation
1
Turn ON the power to the SERVOPACK.
The forward run prohibited (P-OT) or
reverse run prohibited (N-OT) message is
displayed.
When the JOG operation is executed, P-
OT and N-OT are automatically disabled.
2
Press the MODE/SET Key to select the
utility function mode.
3
Press the UP or DOWN Key to select
Fn002.
4
Press the DATA/SHIFT Key for approxi-
mately one second. The display shown on
the left will appear.
5
Press the MODE/SET Key.
The linear servomotor will be in servo
ON status.
View with
front cover open
Panel operator
Alternate
display
MODE/SET
DATA/
MODE/SET
DATA/
MODE/SET
DATA/
MODE/SET
DATA/
