YASKAWA SGD7S-1R9D, Product Manual

Page: 232 / 603

6.14 ZONE Outputs (FT64 Specification)
6.14.3 ZONE Signals 1 to 4 Outputs (/ZONE0 to /ZONE3)
6-60
6.14.3 ZONE Signals 1 to 4 Outputs (/ZONE0 to /ZONE3)
The /ZONE0 to /ZONE3 signals indicate when the current value is within a zone registered in
the ZONE table.
Note: You must allocate the /ZONE0 to /ZONE3 signals to use them. Use PnBA0 (ZONE Output Signal Selection 1)
to allocate them to connector pins. Refer to the following sections for details.
6.1.2 Output Signal Allocations on page 6-5
2751 hex
ZONE table Negative side boundary position (ZONE N)
1 ZONE ID 0 RW No Pos.unit DINT PnA02
2 ZONE ID 1 RW No Pos.unit DINT PnA06
3 ZONE ID 2 RW No Pos.unit DINT PnA0A
4 ZONE ID 3 RW No Pos.unit DINT PnA0E
5 ZONE ID 4 RW No Pos.unit DINT PnA12
6 ZONE ID 5 RW No Pos.unit DINT PnA16
7 ZONE ID 6 RW No Pos.unit DINT PnA1A
8 ZONE ID 7 RW No Pos.unit DINT PnA1E
9 ZONE ID 8 RW No Pos.unit DINT PnA22
10 ZONE ID 9 RW No Pos.unit DINT PnA26
11 ZONE ID 10 RW No Pos.unit DINT PnA2A
12 ZONE ID 11 RW No Pos.unit DINT PnA2E
13 ZONE ID 12 RW No Pos.unit DINT PnA32
14 ZONE ID 13 RW No Pos.unit DINT PnA36
15 ZONE ID 14 RW No Pos.unit DINT PnA3A
16 ZONE ID 15 RW No Pos.unit DINT PnA3E
Continued from previous page.
Index Subindex Name Access PDO Mapping Unit Data Type
Parameter
No.
Type Signal Connector Pin No. Signal Status Meaning
Outputs
/ZONE0 Must be allocated.
ON (closed)
The current value is within a
zone in the ZONE table and /
ZONE0 is active.
OFF (open)
The current value is not within
a zone in the ZONE table or /
ZONE0 is inactive.
/ZONE1 Must be allocated.
ON (closed)
The current value is within a
zone in the ZONE table and /
ZONE1 is active.
OFF (open)
The current value is not within
a zone in the ZONE table or /
ZONE1 is inactive.
/ZONE2 Must be allocated.
ON (closed)
The current value is within a
zone in the ZONE table and /
ZONE2 is active.
OFF (open)
The current value is not within
a zone in the ZONE table or /
ZONE2 is inactive.
/ZONE3 Must be allocated.
ON (closed)
The current value is within a
zone in the ZONE table and /
ZONE3 is active.
OFF (open)
The current value is not within
a zone in the ZONE table or /
ZONE3 is inactive.