2
Setup
2.4 Connection of Welding Power Source and DX200
2-4
169861-1CD
HW1482771
Weldcom Function: Arc
Welding Digital I/F
2.4.2 When Connecting to DX200 the Multiple Welding Power Sources of
Digital Interfaces and also Other Devices with Data Transmission
Function using Ethernet Function
As shown in the following figure, connect the LAN cable to YCP21 for LAN
(CN104) using a switching hub.
CAUTION
•
Use the industrial switching hub that we recommend. (The system
may not properly work with a hub other than this, and we are not
responsible for any problems that may occur.)
•
Our recommended switching hub: Model EDS-205 (manufactured
by MOXA)
DX200
CN104
for LAN
HUB
YCP21
(You can use either cross cable or straight cable.)
Welder1
Digital I/F
Power Source
Welder2
Digital I/F
Power Source
Welder3
Digital I/F
Power Source
20 of 75
