YASKAWA HV600, Technical Reference

Page: 677 / 794

Parameter
List
9
9.18 U: Monitors
YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference 677
No.
(Hex.)
Name Description MFAO Signal Level
U3-40
(301E)
Fault 7 MMDD Shows the month and day when the seventh most recent fault occurred. No signal output available
U3-41
(301F)
Fault 7 HHMM Shows the time when the seventh most recent fault occurred. No signal output available
U3-42
(3020)
Fault 8 YYYY Shows the year when the eighth most recent fault occurred. No signal output available
U3-43
(3021)
Fault 8 MMDD Shows the month and day when the eighth most recent fault occurred. No signal output available
U3-44
(3022)
Fault 8 HHMM Shows the time when the eighth most recent fault occurred. No signal output available
U3-45
(3023)
Fault 9 YYYY Shows the year when the ninth most recent fault occurred. No signal output available
U3-46
(3024)
Fault 9 MMDD Shows the month and day when the ninth most recent fault occurred. No signal output available
U3-47
(3025)
Fault 9 HHMM Shows the time when the ninth most recent fault occurred. No signal output available
U3-48
(3026)
Fault 10 YYYY Shows the year when the tenth most recent fault occurred. No signal output available
U3-49
(3027)
Fault 10 MMDD Shows the month and day when the tenth most recent fault occurred. No signal output available
U3-50
(3028)
Fault 10 HHMM Shows the time when the tenth most recent fault occurred. No signal output available
◆
U4: Maintenance Monitors
No.
(Hex.)
Name Description MFAO Signal Level
U4-01
(004C)
Cumulative Ope Time Shows the cumulative operation time of the drive.
Use parameter o4-01 [Elapsed Operating Time Setting] to reset this monitor. Use parameter o4-02
[Elapsed Operating Time Selection] to select the cumulative operation times from:
•
The time from when the drive is energized until it is de-energized.
•
The time at which the Run command is turned ON.
The maximum value that the monitor will show is 99999 . After this value is more than 99999 , the
drive automatically resets it and starts to count from 0 again.
Unit: 1 h
Note:
The MEMOBUS/Modbus communication data is shown in 10 h units. Use register 0099H for
data in 1 h units.
10 V: 99999 h
U4-02
(0075)
Num of Run Commands Shows how many times that the drive has received a Run command.
Use parameter o4-13 [RUN Command Counter @ Initialize] to reset this monitor. The maximum
value that the monitor will show is 65535 . After this value is more than 65535 , the drive
automatically resets it and starts to count from 0 again.
Unit: 1
10 V: 65535 times
U4-03
(0067)
Cooling Fan Ope Time Shows the cumulative operation time of the cooling fans.
Use parameter o4-03 [Fan Operation Time Setting] to reset this monitor. The maximum value that
the monitor will show is 99999 . After this value is more than 99999 , the drive automatically resets it
and starts to count from 0 again.
Unit: 1 h
Note:
The MEMOBUS/Modbus communication data is shown in 10 h units. Use register 009BH for
data in 1 h units.
10 V: 99999 h
U4-04
(007E)
Cool Fan Maintenance Shows the cumulative operation time of the cooling fans as a percentage of the replacement life of
the cooling fans.
Use parameter o4-03 [Fan Operation Time Setting] to reset this monitor.
Unit: 1%
Note:
Replace the cooling fans when this monitor is 90%.
10 V: 100%