YASKAWA HV600, Technical Reference

Page: 134 / 794

4.4 Keypad Operation
134 YASKAWA SIEPYAIH6B01A HV600 AC Drive Bypass Technical Reference
The configuration procedure is complete.
◆
Show Custom Monitors
The procedure in this section shows how to show the registered custom monitors.
1.
Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on , push (Back) to show [Home] on .
2.
Push (Menu).
3.
Push or to select [Monitors], then push .
4.
Push or to select [Custom Monitor], then push .
The keypad shows the selected monitor as shown in this figure.
•
When there are a minimum of two screens, push or to switch between screens.
•
If you registered only one custom monitor to [Custom Monitor 1], the screen will show only one monitor. If you
registered custom monitors only to [Custom Monitor 1] and [Custom Monitor 2], the screen will show only two
monitors.