![background image](http://html1.mh-extra.com/html/yardline/berkdale-14-x-8/berkdale-14-x-8_manual_3174629044.webp)
42
BACK GABLE UNIT
PARTS REQUIRED:
NAIL FIRST
2" (5,1 cm)
2" (5,1 cm)
Nails
3" (7,6 cm)
x4
You have finished installing your back gable unit.
FINISH
2" (5,1 cm)
x40
SZ
XWA
3"
(7,6 cm)
Screws
6"
(15,2 cm)
Fig. A
TOP PLATE
On the inside, secure gable unit with 3" screws toe-screwed into
XWA
at an angle into
top plate as shown
(Fig. A)
.
2
Back Gable Unit
1
BEGIN
NAIL FIRST
2" (5,1 cm)
Measure 2-9/16" down from top plate and mark at each side as shown. Set gable unit on top plate
.
Hold secure with one 2" nail on each as shown
(Fig. A)
.
BE SURE GABLE UNIT IS CENTERED ON WALL
BEFORE NAILING.
Continue nailing lower edge of panels into top plate using 2" nails 6" apart as shown.
Nail gable panel to rafter using 2" nails 6" apart.
Measure
and mark
2-9/16"
(6,5 cm)
Measure
and mark
2-9/16"
(6,5 cm)