![background image](http://html1.mh-extra.com/html/yardline/berkdale-14-x-8/berkdale-14-x-8_manual_3174629015.webp)
13
Move to the opposite side.
Using the long edge of the panel as a lever,
Move the panel side-to-side until the corner is flush to the floor frame.
Secure panel with two 2" nails in the corners
(Fig. B)
.
2
BEGIN
1
3
Continue attaching the panel using 2" nails 6" apart on edges and 12" apart inside panel.
Use a chalk line or use pre-painted grid lines to nail into joists under panel.
Ensure your floor frame is square by installing one panel and squaring frame.
Install floor panels with the rough side up (painted grid lines side).
PARTS REQUIRED:
x1
x219
5/8 x 48 x 96"
(1,6 x 121,9 x 243,8 cm)
2" (5,1 cm)
Grid lines up
FLOOR PANELS
Install floor panels with the 48" edge and corner flush to the floor frame. Secure panel with two 2" nails
in the corners
(Fig A)
.
Flush
Flush
6"
(15,2 cm)
12"
(30,5 cm)
Flush
(2) Nails
3/4"
(1,9 cm)
Fig. A
Flush
(2) Nails
3/4"
(1,9 cm)
Fig. B
2" (5,1 cm)
Nails
48"
(121,9 cm)
96"
(243,8 cm)