![background image](http://html1.mh-extra.com/html/yardline/berkdale-14-x-8/berkdale-14-x-8_manual_3174629049.webp)
47
ROOF PANELS
7/16 x 15-1/16 x 96"
(1,1 x 38,2 x 243,8 cm)
x1
Roof panels may cause serious injury until securely fastened.
2" (5,1 cm)
PARTS REQUIRED:
x6
7/16 x 15-1/16 x 48"
(1,1 x 38,2 x 121,9 cm)
x1
7/16 x 15-1/16 x 23-7/8"
(1,1 x 38,2 x 60,6 cm)
x1
Measure up from the bottom of front and back rafters 8-1/4". Snap a chalk line across rafters
(Fig A)
.
1
BEGIN
Place the
15-1/16" x 48"
panel flush along the chalk line 1/2" in from the first rafter
(Fig. C)
.
On the 3rd rafter use the 3/4" gauge block
GAA
to center the panel over the rafter
(Fig. B)
.
Secure panel with two 2" (5,1 cm) nails ias shown. Panel will overhang
(Fig D)
.
3
2
Install
15-1/16" x 96"
and
15-1/16" x 23-7/8"
roof panels flush with the chalk line.
Secure each panel with two 2" (5,1 cm) nails as shown. There will be a 1/2" reveal on the end of the rafter
(Fig. E)
.
Panel will overhang
(Fig D)
.
Chalk Line
Note: all roof panels need to be installed with the rough side up (painted grid lines).
3/4"
(1,9 cm)
Gauge
Block
Fig. B
Two Nails
15-1/16" x 48"
(40,3 x 243,8 cm)
Two Nails
Two Nails
Flush
Fig. A
Panel
overhang
Fig. D
Panel 1/2"
(12,7 mm)
Rafter
Edge
Fig. C
15-1/16" x 23-7/8"
(38,2 x 60,6 cm)
15-1/16" x 96"
(38,2 x 60,6 cm)
Rafter
Edge
Fig. E
3/4" GAUGE
BLOCK
GAA
Panel 1/2"
(12,7 mm)
8-1/4"
(20,8 cm)
WINDO
W