5 - 43
CHAS
HANDLEBAR
8. Install:
●
Brake master cylinder
1
●
Brake master cylinder bracket
2
●
Bolt (brake master cylinder bracket)
3
NOTE:
●
Install the bracket so that the arrow mark
a
faces upward.
●
First tighten the bolt on the upper side of the
brake master cylinder bracket, and then
tighten the bolt on the lower side.
9. Install:
●
Engine stop switch
1
●
Clutch lever holder
2
●
Bolt (clutch lever holder)
3
●
Hot starter lever holder
4
●
Bolt (hot starter lever holder)
5
●
Clamp
6
NOTE:
●
The engine stop switch, clutch lever holder
and clamp should be installed according to
the dimensions shown.
●
Pass the engine stop switch lead in the mid-
dle of the clutch lever holder.
T
R
.
.
9 Nm (0.9 m · kg, 6.5 ft · lb)
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
T
R
.
.
4 Nm (0.4 m · kg, 2.9 ft · lb)
10. Install:
●
Clutch cable
1
●
Hot starter cable
2
NOTE:
Apply the lithium soap base grease on the
clutch cable end and hot starter cable end.
11. Adjust:
●
Clutch lever free play
Refer to “CLUTCH ADJUSTMENT”
section in the CHAPTER 3.
●
Hot starter lever free play
Refer to “HOT STARTER LEVER
ADJUSTMENT” section in the CHAP-
TER 3.
