Yamaha YVC-300, User Manual

Page: 29 / 250

28
YVC-300 User ' s Man u al
The prod u ct can w ork w ith the phone f u nction of
the Bl u etooth-connected smartphone.
■
Taking an incoming call
When the Bl u etooth-connected smartphone gets
an incoming call, the microphone indicator flashes
green (red if the microphone is m
u ted) (at 0.25-
second intervals).
By pressing the on/off-hook
bu tton ( ) w hile the
incoming call is received, yo u can talk w ith the
remote party thro u gh the microphone and speaker
of the prod u ct. The on/off-hook indicator lights u p
green d u ring the call.
Some smartphones may ena b le the microphone and
speaker on them after they get an incoming call. To
resolve this sit
u ation, select YVC-300 in the a u dio so u rce
settings of the smartphone to ena b le the microphone
and speaker of the prod u ct.
■
Ending a call
Press the on/off-hook bu tton ( ) d u ring a call. The
on/off-hook indicator t u rns off and the call is ended.
Based on the device to b e connected to the EXT
IN/OUT terminals on the prod u ct, follo w the steps
b elo w to s w itch the setting:
1 Press and hold the both volume
buttons ( ) simultaneously for at
least 2 seconds.
A notification so u nd rings, and the
microphone indicator flashes w hite.
2 Press the volume button ( ) and
set the volume level indicator display
so that the device to be connected is
selected.
Tip
The factory setting is set to "no connected device".
3 Press and hold the both volume
buttons ( ) simultaneously for at
least 0.5 seconds.
A notification so u nd rings w hen the setting is
applied. The microphone indicator goes
b ack to the previo u s state, lighting u p green
or flashing red.
When not u sing a Bl u etooth connection, yo u
can disa b le the Bl u etooth f u nction.
To u se a Bl u etooth connection again, ena b le the
Bl u etooth f u nction.
1 Press and hold the both volume
buttons ( ) simultaneously for at
least 2 seconds.
A notification so u nd rings, and the
microphone indicator flashes w hite.
2 Press the Bluetooth button ( ) to
enable or disable the function.
The Bl u etooth indicator that lights u p green
indicates that the f u nction is ena b led, and
the indicator that is off indicates that the
f
u nction is disa b led.
Accepting an incoming
Bluetooth connection request/
ending a call
Note
Selecting a connected device
on the EXT IN/OUT terminals
Example ( ● : On, ○ : Off)
●○○○○
No connected device
○●○○○
Videoconference system
Enabling or disabling the
Bluetooth function