Yamaha YP125R, Service Manual

Page: 87 / 498

CHASSIS SPECIFICATIONS (YP250R)
2-56
EAS20300
CHASSIS SPECIFICATIONS (YP250R)
Chassis
Frame type Steel tube underbone
Caster angle 28.00°
Trail 100.0 mm (3.94 in)
Front wheel
Wheel type Cast wheel
Rim size 15
×
MT3.5
Rim material Aluminum
Wheel travel 110.0 mm (4.33 in)
Radial wheel runout limit 1.0 mm (0.04 in)
Lateral wheel runout limit 0.5 mm (0.02 in)
Wheel axle bending limit 0.25 mm (0.01 in)
Rear wheel
Wheel type Cast wheel
Rim size 14
×
MT3.75
Rim material Aluminum
Wheel travel 95.0 mm (3.74 in)
Radial wheel runout limit 1.0 mm (0.04 in)
Lateral wheel runout limit 0.5 mm (0.02 in)
Wheel axle bending limit 0.25 mm (0.01 in)
Front tire
Type Tubeless
Size 120/70–15 M/C 56P (PIRELLI)
120/70–15 M/C 56S (MICHELIN)
Manufacturer/model MICHELIN/GOLD STANDARD
PIRELLI/GTS23
Wear limit (front) 1.6 mm (0.06 in)
Rear tire
Type Tubeless
Size 140/70–14 M/C 68P (PIRELLI)
140/70–14 M/C 68S (MICHELIN)
Manufacturer/model MICHELIN/GOLD STANDARD
PIRELLI/GTS24
Wear limit (rear) 1.6 mm (0.06 in)
Tire air pressure (measured on cold tires)
Loading condition 0–90 kg (0–198 lb)
Front 190 kPa (1.90 kgf/cm², 28 psi)
Rear 220 kPa (2.20 kgf/cm², 32 psi)
Loading condition 90 kg–maximum load
Front 210 kPa (2.10 kgf/cm², 30 psi)
Rear 250 kPa (2.50 kgf/cm², 36 psi)
Front brake
Type Single disc brake
Operation Right hand operation